Home › BODY › SEAT › REAR NO. 2 SEAT ASSEMBLY (for 50/50 Split Seat Type)

REAR NO. 2 SEAT ASSEMBLY (for 50/50 Split Seat Type) > DISASSEMBLY

for Preparation Click here



1. REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY LH


    B078862E01
  1. Disengage the claws and remove the 2 screws and reclining cover LH.



    B064894
  1. Remove the screw cover, screw and release handle.



    B064895E01
  1. Disengage the claws and remove the 2 screws and reclining cover RH.

  1. Open the fastener of the seatback cover and remove the seatback protector.

  1. Remove the screw and the cushion.



    B060977
  1. Remove the headrest supports.

  1. Remove the seatback cover together with the pad.

  1. Cut the hog rings and remove the seatback cover.



2. REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY RH


3. REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY LH
  1. Insert a screwdriver between the seat cushion cover and seat cushion under cover.

    NOTICE:
    Tape the screwdriver tip before use.

  1. Pry the seat cushion cover hem to disengage it.

  1. Cut the hog rings and remove the seat cushion cover.



4. REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY RH


5. REMOVE NO. 1 SEAT CUSHION FRAME SUB-ASSEMBLY LH
  1. Remove the 4 screws and seat cushion under cover.

  1. Remove the nut and stopper band.

  1. Remove the 2 bolts, 2 springs and seat leg.