Home › BODY › SEAT › REAR NO. 2 SEAT ASSEMBLY (for 50/50 Split Seat Type)

REAR NO. 2 SEAT ASSEMBLY (for 50/50 Split Seat Type) > REASSEMBLY

for Preparation Click here



1. INSTALL NO. 1 SEAT CUSHION FRAME SUB-ASSEMBLY LH
  1. Install the spring between the seat frame and seat leg.

  1. Install the seat leg with the 2 bolts.

    Torque:
    18 N*m{ 185 kgf*cm , 13 ft.*lbf }

  1. Install the stopper band with the nut.

  1. Install the seat cushion under cover with the 4 screws.



2. REMOVE REAR SEAT INNER BELT ASSEMBLY
  1. Install the seat belt inner with the nut.

    Torque:
    42 N*m{ 430 kgf*cm , 31 ft.*lbf }



3. INSTALL NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY LH
  1. Using hog ring pliers, install the the seat cushion cover with new hog rings.

  1. Place the seat cushion cover together with the pad on the seat frame.

  1. Engage the seat cushion cover hem to the seat cushion under cover securely.



4. INSTALL NO. 2 SEATBACK COVER SUB-ASSEMBLY LH
  1. Using hog ring pliers, install the seatback cover with new hog rings.

  1. Install the seatback cover together with the pad to the seat frame.

  1. Install the headrest supports.

  1. Install the seatback protector.

  1. Close the fastener of the seatback cover.

  1. Install the cushion with the screw.



    B064895E01
  1. Install the reclining cover RH with the 2 screws.



    B064894
  1. Install the release handle with the screw.

  1. Install the screw cover.



    B078862E01
  1. Install the reclining cover LH with the 2 screws.