REAR NO. 2 SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side) > REASSEMBLY |
| 1. INSTALL REMOVE SEAT LOCK CONTROL CABLE SUB-ASSEMBLY |
| 2. INSTALL REAR NO. 1 SEAT LOCK CABLE ASSEMBLY |
| 3. INSTALL REAR SEAT INNER BELT ASSEMBLY |
Remove the nut and belt.
| 4. INSTALL REAR SEAT CUSHION UNDER COVER LH |
Remove the 4 screws and cover.
| 5. INSTALL REAR SEAT HINGE SUB-ASSEMBLY RH |
Install the spring to the ball-joint of the seat stay.
Connect the ball-joint to the seat cushion frame securely.
Install the spring and hinge guide to the hinge.
Install the hinge with the pin and new E-ring.
Install the hinge cover.
| 6. INSTALL REAR SEAT HINGE SUB-ASSEMBLY LH |
Install the hinge guide to the hinge.
Install the hinge with the pin and new E-ring.
Install the hinge cover.
| 7. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER RH |
Install the seat cushion cover to the seat cushion pad with new hog rings.
Install the seat cushion cover together with the pad to the seat cushion frame with new hog rings.
![]() |
Engage the seat cushion cover hem to the seat cushion under cover securely.
| 8. REMOVE REAR SEATBACK COVER RH |
Install the seatback cover to the seatback pad with new hog rings.
Install the seatback cover together with the pad to the seatback frame.
Install the 2 headrest supports.
Install the rear seat protector and close the fastener of the seatback cover.
Install the tether anchor cover.
![]() |
Engage the seatback cover hem.
![]() |
Install the reclining cover RH with the 2 screws.
Install the release handle RH with the screw.
Install the screw cover.
![]() |
Install the reclining cover LH with the 2 screws.