Home › ENGINE · 1GR-FE › FUEL › FUEL PUMP

FUEL PUMP > INSPECTION

for Preparation Click here



1. INSPECT FUEL PUMP


    A032859E02
  1. Inspect the fuel pump resistance.

    1. Using an ohmmeter, measure the resistance between terminals 4 and 5.

      Standard resistance:
      0.2 - 3.0 Ω at 20°C (68°F)

  1. Inspect fuel pump operation.

    1. Apply the battery voltage to both terminals. Check that the pump operates.

      NOTICE:
      1. These tests must be done quickly (within 10 seconds) to prevent the coil from burning out.
      2. Keep fuel pump as far away from the battery as possible.
      3. Always do the switching at the battery side.