FUEL TANK > INSTALLATION |
| 1. INSTALL FUEL TANK TO FILLER PIPE HOSE |
![]() |
Hose and pipe connection is as shown in the illustration.
| 2. INSTALL FUEL TANK BREATHER TUBE SUB-ASSEMBLY |
![]() |
Push in the tube connector to the pipe until the connector makes a "click" sound and install the retainer.
| 3. INSTALL FUEL SUCTION WITH PUMP & GAGE TUBE ASSEMBLY |
![]() |
Install a new gasket onto the fuel tank.
Set the fuel suction tube assembly to the fuel tank.
Fit a spline of the fuel suction tube assembly into a keyway of the fuel tank.
![]() |
Install a retainer.
Using a new retainer, align mark on the retainer with a screw-threads starting point of the fuel tank.
While holding the fuel suction tube assembly, tighten the retainer one complete turn by hand.
![]() |
Using a SST, tighten the retainer one more complete turn, and position the mark on the retainer into a range A of the fuel tank.
| 4. INSTALL FUEL TANK MAIN TUBE AND FUEL TANK RETURN TUBE |
![]() |
Connect the fuel tank main tube with the tube joint clip.
| 5. INSTALL FUEL TANK CUSHION |
![]() |
Install 3 new fuel tank cushions to the fuel tank.
| 6. INSTALL FUEL TANK ASSEMBLY |
Set a mission jack to the fuel tank.
Install the fuel tank and 2 fuel tank bands with the 2 bolts.
| 7. CONNECT FUEL TANK BREATHER TUBE SUB-ASSEMBLY |
![]() |
Push in the tube connector to the pipe until the connector makes a "click" sound.
| 8. CONNECT FUEL TANK MAIN TUBE AND FUEL TANK RETURN TUBE |
![]() |
Push in the tube connector to the pipe until the connector makes a "click" sound.
| 9. INSTALL NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY |
Set a mission jack to the fuel tank protector.
Install the fuel tank protector with the 6 bolts.
| 10. CONNECT FUEL TANK TO FILLER PIPE HOSE |
![]() |
Hose and pipe connection is as shown in the illustration.
| 11. CHECK FOR FUEL LEAKAGE |