Home › ENGINE ยท 1GR-FE › FUEL › FUEL PUMP

FUEL PUMP > REMOVAL

for Preparation Click here



1. REMOVE FUEL SUCTION WITH PUMP & GAGE TUBE ASSEMBLY

NOTICE:
Protect a connector and tube joint with a masking tape or something in order to prevent sticking foreign objects onto them, and clean dirt and foreign objects from the fuel suction tube assembly before removing it.



    A072554E01
  1. Using a SST, loosen the retainer.

    SST
    09808-14020   (09808-01410, 09808-01420, 09808-01430)

    HINT:
    A rib on the retainer can be fitted into a tip of the SST.

  1. Remove the retainer.

  1. Pull out the fuel suction tube assembly.

    NOTICE:
    Be careful not to bend the arm of the sender gage.

  1. Remove the gasket from the fuel tank.