FUEL PUMP > DISASSEMBLY |
| 1. REMOVE FUEL SENDER GAGE ASSEMBLY |
![]() |
Disconnect the sender gage connector from the No. 1 fuel suction plate.
![]() |
Unlock the fuel sender gage and remove it.
| 2. REMOVE FUEL SUB-TANK |
![]() |
Disconnect the fuel pump harness connector from the No. 1 fuel suction plate.
![]() |
Disconnect the suction filter hose from the fuel sub-tank.
![]() |
Disconnect the 2 tubes from the tube clamps.
![]() |
Using a screwdriver with the tip wrapped in tape, disengage the 3 claws to separate the No. 2 fuel suction plate.
Disconnect the No. 1 fuel suction plate with the fuel filter assembly from the fuel sub-tank.
| 3. REMOVE FUEL PUMP ASSEMBLY WITH FILTER |
![]() |
Using a screwdriver with the tip wrapped in tape, disengage the 2 claws to separate the fuel suction support.
Remove the fuel filter assembly with the fuel pump from the fuel suction support.
| 4. REMOVE FUEL PUMP |
![]() |
Using a screwdriver with the tip wrapped in tape, disengage the 5 claws to separate the suction filter.
Remove the fuel suction filter with the fuel pump from the fuel filter.
![]() |
Disconnect the fuel pump harness connector from the fuel pump.
![]() |
Remove the O-ring from the fuel pump.
| 5. REMOVE NO. 2 FUEL SUCTION PLATE |
![]() |
Using a screwdriver, remove the 2 E-rings from the No. 2 suction plate.
Remove the No. 2 suction plate and 2 springs from the No. 1 fuel suction plate.