Home › ENGINE ยท 2UZ-FE › FUEL › FUEL PUMP

FUEL PUMP > REASSEMBLY

for Preparation Click here



1. INSTALL NO. 2 FUEL SUCTION PLATE


    A133794
  1. Install the 2 springs and No. 2 suction plate to the No. 1 suction plate.

  1. Using needle-nose pliers, install 2 new E-rings to the No. 2 suction plate.



2. INSTALL FUEL PUMP


    A133793
  1. Apply a light coat of gasoline or spindle oil to a new O-ring, and install it to the fuel pump.



    A133792
  1. Connect the fuel pump harness connector to the fuel pump.



    A133791
  1. Install the suction filter to the fuel pump.

  1. Install the fuel pump with the suction filter to the fuel filter.



3. INSTALL FUEL PUMP ASSEMBLY WITH FILTER


    A133795
  1. Install the fuel filter to the fuel sub-tank.



4. INSTALL FUEL SUB-TANK


    A133789
  1. Engage the 3 claws to install the No. 2 fuel suction plate the fuel sub-tank.



    A133788
  1. Connect the 2 tubes to the tube clamps.



    A133787
  1. Connect the suction filter hose to the fuel sub-tank.



    A133786
  1. Connect the fuel pump harness connector to the No. 1 fuel suction plate.



5. INSTALL FUEL SENDER GAGE ASSEMBLY


    A133796E01
  1. Install the fuel sender gage to the fuel suction support.



    A133784
  1. Connect the sender gage connector to the No. 1 fuel suction plate.