Home › BODY ELECTRICAL › HORN › HORN RELAY

HORN RELAY > INSPECTION

for Preparation Click here



1. INSPECT HORN RELAY ASSEMBLY


    B016200E24
  1. Remove the horn relay from the instrument panel junction block assembly.

  1. Inspect the horn relay continuity.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    Below 1 Ω
    3 - 5
    Apply B+ between terminals 1 and 2

    If the result is not as specified, replace the relay assembly.