Home › DRIVE LINE ยท PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY (for 2WD)

PROPELLER SHAFT ASSEMBLY (for 2WD) > INSTALLATION

for Preparation Click here



1. INSTALL PROPELLER SHAFT ASSEMBLY


    C098710E03
  1. Remove the SST from the extension housing.

    SST
    09325-40010  

  1. Install the propeller shaft assembly in the extension housing.



    C098711E02
  1. Align the matchmarks on the propeller shaft flange and differential flange.

  1. Install the propeller shaft assembly with the 4 nuts and 4 washers.

    Torque:
    88 N*m{ 897 kgf*cm , 65 ft.*lbf }