Home › ENGINE ยท 1GR-FE › EMISSION CONTROL › CANISTER

CANISTER > INSTALLATION

for Preparation Click here



1. INSTALL CHARCOAL CANISTER ASSEMBLY
  1. Install the charcoal canister with the 3 bolts.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. Connect the purge line hose to the charcoal canister.

  1. Connect the VSV connector to the CCV.

  1. Connect the canister outlet hose No. 2 to the charcoal canister.

  1. Connect the fuel tank hose to the charcoal canister.



2. INSTALL CHARCOAL CANISTER NO. 2 FILTER


    A067131
  1. Install the charcoal canister with a bolt.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. Connect the canister outlet hose to the fuel tank filler pipe.

  1. Connect the canister outlet hose No. 2 to the charcoal canister.



3. INSTALL SPARE TIRE