Home › ENGINE ยท 1GR-FE › EMISSION CONTROL › CANISTER

CANISTER > REMOVAL

for Preparation Click here



1. REMOVE SPARE TIRE


2. REMOVE CHARCOAL CANISTER NO. 2 FILTER


    A067130E01
  1. Disconnect the canister outlet hose No. 2 from the charcoal canister.

    1. Deeply push the connector inside.

    2. Pinch portion A.

    3. Pull out the connector.

  1. Disconnect the canister outlet hose from the fuel tank filler pipe.



    A067131
  1. Remove a bolt and the charcoal canister filter.



3. REMOVE CHARCOAL CANISTER ASSEMBLY


    A067129E01
  1. Disconnect the fuel tank vent hose from the charcoal canister.

    1. Deeply push the connector inside.

    2. Pinch portion A.

    3. Pull out the connector.

  1. Disconnect the canister outlet hose No. 2 from the charcoal canister.

    1. Deeply push the connector inside.

    2. Pinch portion A.

    3. Pull out the connector.

  1. Disconnect the VSV connector from the CCV.

  1. Disconnect the purge line hose from the charcoal canister.

  1. Remove the 3 bolts and the charcoal canister from the body.