Home › ENGINE · 1GR-FE › EMISSION CONTROL › AIR FUEL RATIO SENSOR

AIR FUEL RATIO SENSOR > INSPECTION

for Preparation Click here



1. INSPECT AIR FUEL RATIO SENSOR (for Bank 1 and Bank 2)


    G039663E03
  1. Using an ohmmeter, measure the resistance between the terminals.

    Resistance:
    Terminal No.
    Resistance
    1 (HT) - 2 (+B)
    1.8 to 3.4 Ω at 2°C (68°F)
    1 (HT) - 4 (AF-)
    No continuity

    If the resistance is not as specified, replace the sensor.