Home › ENGINE · 1GR-FE › EMISSION CONTROL › HEATED OXYGEN SENSOR

HEATED OXYGEN SENSOR > INSPECTION

for Preparation Click here



1. INSPECT HEATED OXYGEN SENSOR (for Bank 1 and Bank 2)


    A062378E42
  1. Using an ohmmeter, measure the resistance between the terminals.

    Resistance:
    Terminal No.
    Resistance
    1 (HT) - 2 (+B)
    11 to 16 Ω at 20°C (68°F)
    1 (HT) - 4 (E1)
    No Continuity

    If the resistance is not as specified, replace the sensor.