Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AIR CONDITIONING UNIT

AIR CONDITIONING UNIT > DISASSEMBLY

for Preparation Click here



1. REMOVE MODE DAMPER SERVO SUB-ASSEMBLY


    I033484
  1. Remove the 3 screws and mode damper servo sub-assembly.



2. REMOVE DAMPER SERVO SUB-ASSEMBLY (INDEPENDENCE TEMPERATURE CONTROL)


    I033486
  1. Remove the 3 screws and damper servo sub-assembly.



3. REMOVE DAMPER SERVO SUB-ASSEMBLY


    I033485
  1. Remove the 3 screws and damper servo sub-assembly.



4. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY


    I034326
  1. Remove the screw, clamp and heater radiator unit sub-assembly.



5. REMOVE COOLER UNIT DRAIN HOSE NO. 1


6. REMOVE AIR CONDITIONING TUBE ASSEMBLY


    I033481E01
  1. Remove the screw.

  1. Release the claw fitting and remove the cover.



    I034327
  1. Using a hexagon wrench 4.0 mm (0.15 in.), remove the 2 hexagon bolts and air conditioning tube assembly.

  1. Remove the 2 O-rings from the air conditioning tube assembly.



7. REMOVE COOLER EXPANSION VALVE


    I034328
  1. Remove the cooler expansion valve from the cooler evaporator sub-assembly No.1.



8. REMOVE COOLING UNIT PACKING NO. 1


    I034368
  1. Remove the cooling unit packing No. 1.



9. REMOVE COOLER EVAPORATOR SUB-ASSEMBLY NO. 1


    I034329
  1. Remove the 4 screws and air duct sub-assembly.



    I033488
  1. Remove the 8 screws and separate the heater case.

  1. Remove the cooler evaporator sub-assembly No. 1.



    I033489
  1. Remove the 2 O-rings from the cooler evaporator sub-assembly No. 1.



10. REMOVE COOLER THERMISTOR NO. 1


    C119714
  1. Remove the cooler thermistor No. 1 from the cooler evaporator sub-assembly No. 1.



11. REMOVE COVER PLATE