Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › COMPRESSOR AND MAGNETIC CLUTCH (for 2UZ-FE)

COMPRESSOR AND MAGNETIC CLUTCH (for 2UZ-FE) > DISASSEMBLY

for Preparation Click here



1. REMOVE MAGNETIC CLUTCH ASSEMBLY
  1. Place the compressor and magnetic clutch in a vise.



    I033497
  1. Using SST, remove the bolt, magnetic clutch hub and magnetic clutch washer.

    SST
    09960-10010   (09962-01000, 09963-00500)



    E037091
  1. Using a snap ring expander, remove the snap ring and magnetic clutch rotor.

  1. Remove the screw and disconnect the connector.



    E050116
  1. Using a snap ring expander, remove the snap ring and magnetic clutch starter.



2. REMOVE COOLER COMPRESSOR BRACKET


3. REMOVE COOLER COMPRESSOR ASSEMBLY