Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › COMPRESSOR AND MAGNETIC CLUTCH (for 1GR-FE)

COMPRESSOR AND MAGNETIC CLUTCH (for 1GR-FE) > DISASSEMBLY

for Preparation Click here



1. REMOVE MAGNETIC CLUTCH ASSEMBLY


    I034407
  1. Place the compressor and magnetic clutch in a vise.

  1. Using SST, remove the bolt, the magnetic clutch hub and the magnetic clutch washer.

    SST
    09960-10010   (09962-01000, 09963-00500)



    I034346
  1. Using a snap ring expander, remove the snap ring and the magnetic clutch rotor.

  1. Remove the screw and disconnect the connector.



    I034347
  1. Using a snap ring expander, remove the snap ring and the magnetic clutch starter.



2. REMOVE COOLER COMPRESSOR ASSEMBLY