COMPRESSOR AND MAGNETIC CLUTCH (for 1GR-FE) > REASSEMBLY |
| 1. INSTALL MAGNETIC CLUTCH ASSEMBLY |
![]() |
Fit the parts shown in the illustration and install the magnetic clutch starter.
![]() |
Using a snap ring expander, install a new snap ring with the chamfered side facing up.
Install the screw and connect the connector.
![]() |
Using a snap ring expander, install the magnetic clutch rotor and a new snap ring with the chamfered side facing up.
Install the magnetic clutch washer and the magnetic clutch hub.
![]() |
Using SST, install the magnetic clutch hub and magnetic clutch washer with the bolt.