Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › CONDENSER

CONDENSER > REMOVAL

for Preparation Click here



1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM
  1. Start up the engine.

  1. Turn the A/C switch on.

  1. Operate the cooler compressor at an engine speed of approximately 1,000 rpm for 5 to 6 minutes to circulate the refrigerant and collect the compressor oil remaining in each component into the cooler compressor.

  1. Stop the engine.

  1. Using SST, discharge the refrigerant gas.

    SST
    07110-58060   (07117-58060, 07117-58070, 07117-58080, 07117-58090, 07117-78050, 07117-88060, 07117-88070, 07117-88080)



2. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY


    I033500
  1. Remove the bolt and disconnect the cooler refrigerant discharge hose sub-assembly from the cooler condenser assembly.

  1. Remove the O-ring from the cooler refrigerant discharge hose sub-assembly.

    NOTICE:
    Seat the opening of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.



3. DISCONNECT AIR CONDITIONING TUBE ASSEMBLY


    I033501
  1. Remove the bolt and disconnect the air conditioning tube assembly from the cooler condenser assembly.

  1. Remove the O-ring from the air conditioning tube assembly.

    NOTICE:
    Seal the opening of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.



4. REMOVE COOLER CONDENSER CUSHION NO. 2


    I033507
  1. Remove the nut and cooler condenser bracket No. 1.



    I033924
  1. Remove the 4 bolts, nut and cooler condenser cushion No. 2.



5. REMOVE COOLER CONDENSER CUSHION NO. 1


    I033925
  1. Remove the 4 bolts and cooler condenser cushion No. 1.



6. REMOVE COOLER CONDENSER CORE


    I033505E01
  1. Remove the cooler condenser core.