Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › CONDENSER

CONDENSER > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT COOLER CONDENSER ASSEMBLY
  1. If a fin of the cooler condenser assembly is dirty, clean it with water and dry it with compressor air.

    NOTICE:
    Do not damage the fin of the condenser assembly.

  1. If a fin of the condenser assembly is bent, make it straight using a screwdriver or pliers.



2. INSPECT CONDENSER FOR LEAKAGE OF REFRIGERANT
  1. Using a halogen leak detector, check pipe joints for gas leakage.

  1. If gas leakage is detected in a joint, check the torque of the joint.