Home
›
ENGINE · 2UZ-FE
›
EMISSION CONTROL
›
AIR FUEL RATIO SENSOR
AIR FUEL RATIO SENSOR > INSPECTION
for Preparation
Click here
1. INSPECT AIR FUEL RATIO SENSOR (for Sensor 1)
Using an ohmmeter, measure resistance between the terminals.
Resistance:
Terminal No.
Resistance
1 (HT) ←→ 2 (+B)
11 to 16 Ω at 20°C (68°F)
1 (HT) ←→ 4 (E1)
10 kΩ or higher
If the resistance is not as specified, replace the sensor.