Home › RESTRAINTS › SEAT BELT › FRONT SEAT OUTER BELT ASSEMBLY

FRONT SEAT OUTER BELT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEAT OUTER BELT ASSEMBLY LH

NOTICE:
Do not apply battery voltage to pretensioner connector.



    B064703E01
  1. Inspect the tension reducer operation.

    1. Connect the positive lead from the battery to terminal 1 of connector A and the negative lead to terminal 2.

    2. Check that the operating noise that the magnetized solenoid is attracting the plunger is heard.

    3. Check that the rewinding volume of the seat belt increases when the seat belt is pulled out and the battery negative lead is disconnected.
      If the result is not as specified, replace the outer belt assembly.



2. INSPECT FRONT SEAT OUTER BELT ASSEMBLY RH

NOTICE:
Do not apply battery voltage to pretensioner connector.



    B064703E01
  1. Inspect the tension reducer operation.

    1. Connect the positive lead from the battery to terminal 1 of connector A and the negative lead to terminal 2.

    2. Check that the operating noise that the magnetized solenoid is attracting the plunger is heard.

    3. Check that the rewinding volume of the seat belt increases when the seat belt is pulled out and the battery negative lead is disconnected.
      If the result is not as specified, replace the outer belt assembly.