Home › BODY › ENGINE HOOD / DOOR › BACK DOOR CLOSER SYSTEM

BACK DOOR CLOSER SYSTEM > DATA LIST / ACTIVE TEST

for Preparation Click here



READ DATA LIST

HINT:
According to the DATA LIST displayed by the intelligent tester, you can read the value of the switch, sensor, actuator and so on without parts removal. Reading the DATA LIST as a first step of troubleshooting is one of the method to shorten the labor time.

  1. Connect the intelligent tester (with CAN VIM) to the DLC3.

  2. Turn the ignition switch ON.

  3. According to the display on tester, read the DATA LIST.

    Item
    Measurement Item/ Display (Range)
    Normal Condition
    Diagnostic Note
    KEY SW(UNLK)
    Back door key lock and unlock SW signal/ ON or OFF
    ON: Back door lock key cylinder is turned to unlock
    OFF: Key is in back door lock key cylinder (Neutral position)
    -
    KEY SW(LOCK)
    Back door key lock and unlock SW signal/ ON or OFF
    ON: Back door lock key cylinder is turned to lock
    OFF: Key is in back door lock key cylinder (Neutral position)
    -
    HALF LATCH SW
    Back door half latch SW signal/ON or OFF
    ON: Back door is open
    OFF: Back door is closed
    -
    FULL LATCH SW
    Back door full latch SW (courtesy SW) signal/ON or OFF
    ON: Back door is closed
    OFF: Back door is open
    -
    DOOR HANDLE SW
    Back door opener SW signal/ON or OFF
    ON: Back door opener is pushed
    OFF: Back door opener is not pushed
    -
    LOCK STATUS
    Back door position SW signal/UNLOCK or LOCK
    UNLOCK: Back door is unlock
    LOCK: Back door is lock
    -


PERFORM ACTIVE TEST

HINT:
Performing the ACTIVE TEST using the intelligent tester allows the relay, VSV, actuator and so on to operate without parts removal. Performing the ACTIVE TEST as a first step of troubleshooting is one of the method to shorten the labor time.
It is possible to display the DATA LIST during the ACTIVE TEST.

  1. Connect the intelligent tester (with CAN VIM) to the DLC3.

  2. Turn the ignition switch ON.

  3. According to the display on tester, perform the ACTIVE TEST.

    Item
    Test Details
    Diagnostic Note
    LATCH RELEASE
    Back door lock latch is release ON/OFF
    -