Home › BODY › ENGINE HOOD / DOOR › HOOD SUPPORT ROD

HOOD SUPPORT ROD > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are for the LH side.
  3. A bolt without a torque specification is shown in the standard bolt chart .



1. REMOVE HOOD SUPPORT ASSEMBLY LH


    B062405
  1. Remove the 2 bolts and the hood support from the hood panel.

    HINT:
    While supporting the hood by hand, remove the hood support.

  1. Remove the bolt and hood support from the vehicle body.