BACK DOOR > ADJUSTMENT |
| 1. INSPECT BACK DOOR PANEL SUB-ASSEMBLY |
Check that the clearance is within the standard value.

| Area | Measurement |
| A | 6.5 +- 1.5 mm (0.296 +- 0.059 in.) |
| B | 10.0 +- 1.5 mm (0.394 +- 0.059 in.) |
| C | 15.0 +- 1.5 mm (0.591 +- 0.059 in.) |
| 2. ADJUST BACK DOOR PANEL SUB-ASSEMBLY |
![]() |
Adjust the back door panel position.
![]() |
Adjust the door horizontally and forward/rearward by loosening the body side hinge nuts.
Tighten the body side hinge nuts after adjustment.
![]() |
Horizontally and vertically adjust the back door by loosening the back door side hinge bolts.
Tighten the back door side hinge bolts after the adjustment.
![]() |
Adjust the striker position by slightly loosening the striker mounting screws and hitting the striker with a plastic-faced hammer.
Tighten the striker mounting screws after the adjustment.
![]() |
Adjust the door stopper, as shown in the illustration, so that the door can be opened/closed smoothly.
Tighten the door stopper after the adjustment.