Home › BODY › ENGINE HOOD / DOOR › BACK DOOR SUPPORT

BACK DOOR SUPPORT > DISPOSAL

for Preparation Click here


HINT:
Use the same procedures for the RH side and LH side.



1. DISPOSE OF BACK DOOR DUMPER STAY SUB-ASSEMBLY


    B065104E15
  1. Horizontally fix the stay in a vise with the piston-rod pulled out.

  1. Wearing safety glasses, gradually cut a part between A and B as shown in the illustration using a metal saw to gradually release the gas.

    Specification:
    Area
    Measurement
    a
    80 mm (3.15 in.)
    b
    20 mm (0.80 in.)

    CAUTION:
    Be careful to cover the area that is being cut as there is a possibility that metal debris could be blown out by the gas (the gas is colorless, odorless and harmless).