Home › BODY ELECTRICAL › LIGHTING › TOWING CONVERTER RELAY

TOWING CONVERTER RELAY > INSTALLATION

for Preparation Click here



1. INSTALL TOWING CONVERTER RELAY


2. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER LH
  1. Install the side garnish and engage the 9 clips.

  1. Install the 3 bolts and clip.

  1. Install the tonneau cover hook and the screw.



3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
  1. Install the side panel and engage the 6 clips.



    B063598E02
  1. Install the 3 screws and clips.

  1. Install the screw and deck trim cover.



4. INSTALL DECK TRIM SIDE BOARD UPR LH
  1. Install the side board and the screw.



5. INSTALL DECK TRIM COVER REAR


6. INSTALL DECK FLOOR BOX LH


    B063597
  1. Install the deck floor box, luggage hold belt and bolt.

  1. Install the cover and the claws.



7. INSTALL DECK FLOOR BOX RH

HINT:
Use the same procedure described for the LH side.



8. INSTALL DECK BOARD ASSEMBLY


    B063596
  1. Install the deck board assembly and the 2 bolts.



9. INSTALL DECK BOARD SUB-ASSEMBLY
  1. Install the deck board sub-assembly and the 2 bolts.



10. INSTALL REAR FLOOR MAT SUPPORT PLATE REAR


    B063594
  1. Install the mat support plate and 5 bolts.



11. INSTALL BACK DOOR WEATHERSTRIP


12. INSTALL TONNEAU COVER RETRACTOR SUB-ASSEMBLY