TOWING CONVERTER RELAY > REMOVAL |
| 1. REMOVE TONNEAU COVER RETRACTOR SUB-ASSEMBLY |
| 2. REMOVE BACK DOOR WEATHERSTRIP |
| 3. REMOVE REAR FLOOR MAT SUPPORT PLATE REAR |
![]() |
Remove the 5 bolts and mat support plate.
| 4. REMOVE DECK BOARD SUB-ASSEMBLY |
Remove the 2 bolts and the deck board sub-assembly.
| 5. REMOVE DECK BOARD ASSEMBLY |
![]() |
Remove the 2 bolts and the deck board assembly.
| 6. REMOVE DECK FLOOR BOX RH |
| 7. REMOVE DECK FLOOR BOX LH |
![]() |
Using a screwdriver, disengage the claws and remove the cover.
Remove the bolt, deck floor box and luggage hold belt striker.
| 8. REMOVE DECK TRIM COVER REAR |
Using a screwdriver, pry out the trim cover.
| 9. REMOVE DECK TRIM SIDE BOARD UPR LH |
Remove the screw and side board.
| 10. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH |
![]() |
Remove the screw and deck trim cover.
Remove the 3 screws and clips.
Using a screwdriver, disengage the 6 clips and remove the side panel.
| 11. REMOVE ROOF SIDE GARNISH ASSEMBLY INNER LH |
![]() |
Remove the screw and tonneau cover hook.
Remove the 3 bolts and clip.
Using a screwdriver, disengage the 9 clips and remove the side garnish.
| 12. REMOVE TOWING CONVERTER RELAY |
![]() |
Disconnect the connector.
Remove the bolt and towing converter relay.