Home › SUSPENSION & AXLE › TIRE AND WHEEL › TIRE PRESSURE WARNING SYSTEM

TIRE PRESSURE WARNING SYSTEM > TERMINALS OF ECU

for Preparation Click here


HINT:
Inspect the connectors from the back side while the connectors are connected.


TIRE PRESSURE MONITOR ECU

F045856E01


Symbols (Terminals No.)
Wiring Color
Terminal Description
Condition
Specified Condition
IG (T16-2) - GND (T16-11)
B-R - W-B
IG power source
IG switch ON
10 to 14 V
SPD (T16-3) - GND (T16-11)
V-R - W-B
Vehicle speed signal
Vehicle is running
Pulse generation
SIL (T16-4) - GND (T16-11)
R-Y - W-B
Diagnosis tester communication line
IG switch ON, when communication is not performed with a tester
8 V or more
IND (T16-6) - GND (T16-11)
P-B - W-B
Tire pressure warning light output signal
IG switch ON, tire pressure warning light ON
8 V or more
IND (T16-6) - GND (T16-11)
P-B - W-B
Tire pressure warning light output signal
IG switch ON, tire pressure warning light OFF
Below 1.5 V
RDA (T16-7) - GND (T16-11)
GR - W-B
Tire pressure monitor receiver input signal
IG switch ON, when the tire pressure monitor receiver is not connected
10 to 14 V
RF5V (T16-8) - GND (T16-11)
L - W-B
Tire pressure monitor receiver power source
IG switch ON
4.5 to 5.5 V
GND (T16-11) - Body ground
W-B - Body ground
Ground
Always
Below 1 Ω
TC (T16-12) - GND (T16-11)
P-L - W-B
TC terminal
When terminal TC is not connected.
8 V or more
GND2 (T16-16) - GND (T16-11)
LG-B - W-B
Tire pressure monitor receiver ground
Always
Below 1 Ω