Home › SUSPENSION & AXLE › TIRE AND WHEEL › TIRE PRESSURE WARNING VALVE AND TRANSMITTER

TIRE PRESSURE WARNING VALVE AND TRANSMITTER > DISPOSAL

for Preparation Click here


HINT:
The tire pressure monitor valve sub-assembly is powered by a lithium battery. When disposing the tire pressure monitor valve sub-assembly, remove the battery and dispose it correctly.



1. DISPOSE OF TIRE PRESSURE WARNING VALVE AND TRANSMITTER


    F046448
  1. Insert the tip of a screwdriver into the clearance and pry off the cover. Remove the back cover.



    F046449E02
  1. The battery and base board covered with silicone resin are exposed. While taking out the battery, cut off the 2 terminals which connects the battery and base board.