Home › BODY ELECTRICAL › DOOR LOCK › DOOR CONTROL SWITCH

DOOR CONTROL SWITCH > INSPECTION

for Preparation Click here



1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY


    B059539E21
  1. Measure the resistance according to the Value(s) in the table below.

    Standard resistance:
    Terminal No.
    Switch Position
    Specified Condition
    1 - 5
    Lock
    Below 1 Ω
    -
    OFF
    10 kΩ or higher
    1 - 8
    Unlock
    Below 1 Ω

    If the result is not as specified, replace the switch assembly.



2. INSPECT DOOR CONTROL SWITCH ASSEMBLY


    B134223E01
  1. Passenger side switch:
    Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Terminal No.
    Switch Position
    Specified Condition
    3 - 6
    Lock
    Below 1 Ω
    -
    OFF
    10 kΩ or higher
    3 - 5
    Unlock
    Below 1 Ω



3. INSPECT BACK DOOR OPENER SWITCH ASSEMBLY


    B062727E01
  1. Inspect the back door opener switch continuity.

    Standard resistance:
    Terminal No.
    Condition
    Specified Condition
    1 - 2
    Free
    10 kΩ or higher
    Pushed
    Below 1 Ω

    If the result is not as specified, replace the switch assembly.