Home › BODY › WINDSHIELD / WINDOWGLASS › POWER WINDOW CONTROL SYSTEM

POWER WINDOW CONTROL SYSTEM > TERMINALS OF ECU

for Preparation Click here



CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY (BODY ECU)

B062914E02

  1. Check the voltage or resistance between the terminals of the connectors.

    Standard :

    Symbols (Terminal No.)
    Wiring Color
    Condition
    Specified Condition
    BUP (B5-10) ←→ COM (B5-19)
    Y-R ←→ B-Y
    1. Ignition switch ON
    2. Back door power window switch UP
    Less than 1.5 V
    Back door power window switch OFF
    More than 5 kΩ
    BDN (B5-8) ←→ COM (B5-19)
    B-L ←→ B-Y
    1. Ignition switch ON
    2. Back door power window switch DOWN
    Less than 1.5 V
    Back door power window switch OFF
    More than 5 kΩ
    W/L1 (B6 24) ←→ W/L2 (B6-22)
    L Y ←→ L-R
    Window lock switch ON
    Less than 1.0 V
    Window lock switch OFF
    More than 1 kΩ

    If the result is not as specified, the instrument panel J/B assembly (body ECU) malfunctions.


CHECK MULTIPLEX NETWORK DOOR ECU (BACK DOOR ECU)

B134204E02

  1. Check the voltage or continuity between the terminals of the connectors.

    Standard:

    Symbols (Terminal No.)
    Wiring Color
    Condition
    Specified Condition
    BDR (B8-4) ←→ Body ground
    L ←→ -
    Constant
    10 to 14 V
    BECU (B8-5) ←→ Body ground
    L-R ←→ -
    Constant
    10 to 14 V
    SIG (B8-6) ←→ Body ground
    B ←→ -
    Ignition switch OFF
    Less than 1 V
    Ignition switch ON
    10 to 14 V
    SGND (B9-18) ←→ GND (B8-3)
    G-R ←→ W-B
    Constant
    Continuity
    GND (B8-3) ←→ Body ground
    W-B ←→ -
    Constant
    Continuity
    BDUP (B9-13) ←→ BDDN (B9-25)
    Y-B ←→ R-B
    Back door power window in close operation
    10 to 14 V
    BDDN (B9-25) ←→ BDUP (B9-13)
    R-B ←→ Y-B
    Back door power window in open operation
    10 to 14 V
    IC+ (B9-11) ←→ IC- (B9-23)
    Y-G ←→ L-W
    Constant
    6 to 14 V
    IC1 (B9-16) ←→ IC- (B9-23)
    B-O ←→ L-W
    Back door power window in operation
    Pulse generates
    IC2 (B9-17) ←→ IC- (B9-23)
    W-R ←→ L-W
    Back door power window in operation
    Pulse generates
    UP (B9-5) ←→ E (B9-19)
    V-Y ←→ LG-B
    Back door lock key cylinder turned right using key
    Continuity
    DOWN (B9-4) ←→ E (B9-19)
    GR-R ←→ LG-B
    Back door lock key cylinder turned left using key
    Continuity
    E (B9-19) ←→ SGND (B9-18)
    LG-B ←→ G-R
    Constant
    Continuity
    P (B9-12) ←→ SGND (B9-18)
    P-B ←→ G-R
    Rear wiper in retract position
    Less than 1 V

    If the result is not as specified, the multiplex network door ECU back (back door ECU) malfunctions.