Home › BODY › WINDSHIELD / WINDOWGLASS › POWER WINDOW CONTROL SYSTEM

DTC    B1241    Body ECU Switch Circuit Diagnosis

for Preparation Click here


DESCRIPTION

DTC B1241 is output when the back door power window switch, the defogger switch and the rear power window switch are on. When these switches are off, this DTC is not output.
Using this DTC, you can check whether these switches are normal or not.

DTC No.
DTC Detection Condition
Suspected Part
B1241
Back door power window switch, defogger switch and rear wiper switch are operating
  1. Back door power window regulator switch assembly
  2. Defogger switch assembly
  3. Rear wiper switch assembly
  4. Wire harness

WIRING DIAGRAM


B062903E02


INSPECTION PROCEDURE

1.CHECK BACK DOOR POWER WINDOW OPERATION
  1. Check that the back door power window operates via the back door power window switch.



OK
INSPECT DEFOGGER SWITCH OR REAR WIPER SWITCH
NG


2.INSPECT BACK DOOR POWER WINDOW REGULATOR SWITCH ASSEMBLY


    B062904
  1. Remove the power window switch.

  1. Check the continuity between the terminals of the switch connector when the switch is operated.

    Standard:
    Terminal No.
    Switch
    Specified Condition
    3 ←→ 1
    Down
    Continuity
    6 ←→ 3 ←→ 1
    OFF
    No continuity
    6 ←→ 1
    Up
    Continuity



OK
REPAIR OR REPLACE HARNESS AND CONNECTOR (SWITCH - BODY ECU)
NG

REPLACE BACK DOOR POWER WINDOW REGULATOR SWITCH ASSEMBLY