Home › BODY ELECTRICAL › OTHER SYSTEM › VOLTAGE INVERTER

VOLTAGE INVERTER > REMOVAL

for Preparation Click here



1. REMOVE REAR DOOR SCUFF PLATE LH


    B076924E01
  1. Using a screwdriver, disengage the claw labeled A, claw labeled B, 2 claws labeled C and claw labeled D. Remove the scuff plate.

    HINT:
    Tape the screwdriver tip before use.



2. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH


3. REMOVE TONNEAU COVER RETRACTOR SUB-ASSEMBLY


4. REMOVE BACK DOOR WEATHERSTRIP


5. REMOVE REAR FLOOR MAT SUPPORT PLATE REAR


6. REMOVE DECK BOARD SUB-ASSEMBLY
  1. Remove the 2 bolts and the deck board sub-assembly.



7. REMOVE DECK BOARD ASSEMBLY


    B063596
  1. Remove the 2 bolts and the deck board assembly.



8. REMOVE DECK FLOOR BOX LH


    B063597
  1. Using a screwdriver, disengage the claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.

  1. Remove the bolt, deck floor box and luggage hold belt striker.



9. REMOVE DECK TRIM COVER REAR


10. REMOVE TONNEAU COVER HOOK B


11. REMOVE DECK SIDE TRIM COVER LH


12. REMOVE VOLTAGE INVERTER


    I033397
  1. Disconnect the connector.

  1. Remove the 2 bolts and voltage inverter.