Home › BODY ELECTRICAL › OTHER SYSTEM › CENTER POWER OUTLET SOCKET

CENTER POWER OUTLET SOCKET > REMOVAL

for Preparation Click here



1. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    B062741E01
  1. Disengage the 6 clips and 2 claws, and then remove the upper console panel sub-assembly.

    NOTICE:
    Be careful not to snap the claws during the operation.



2. REMOVE CTR POWER OUTLET SOCKET ASSEMBLY


    E116222
  1. Disconnect the connector.

  1. Disengage the wire harness clamp.

  1. Disengage the 2 claws and remove the CTR power outlet socket assembly.