EXHAUST PIPE > INSTALLATION |
| 1. INSTALL HEATED OXYGEN SENSOR (for Bank 2) |
Install the heated oxygen sensor to the exhaust pipe front.
Connect the heated oxygen sensor connector.
| 2. INSTALL EXHAUST PIPE ASSEMBLY FRONT |
Install a new gasket and the front pipe to the exhaust manifold.
Install the exhaust pipe front with 2 nuts.
| 3. INSTALL HEATED OXYGEN SENSOR (for Bank 1) |
Install the heated oxygen sensor to the exhaust pipe front.
Connect the heated oxygen sensor connector.
| 4. INSTALL NO. 2 EXHAUST FRONT PIPE ASSEMBLY |
Install 2 new gaskets and the front pipe to the exhaust manifold.
Install the exhaust pipe front with the 2 bolts and 2 nuts.
| 5. INSTALL EXHAUST PIPE ASSEMBLY CENTER |
![]() |
Using a vernier caliper, measure the free length to the compression spring.
Install a new gasket on the exhaust pipe assembly front.
Install the exhaust pipe assembly center with the 2 bolts and 2 springs.
| 6. INSTALL EXHAUST PIPE ASSEMBLY TAIL |
Install a new gasket on the exhaust pipe center.
Install the tail pipe with the 2 bolts.
| 7. INSPECT EXHAUST GAS LEAKAGE |