Home › BODY ELECTRICAL › OTHER SYSTEM › REAR POWER OUTLET SOCKET

REAR POWER OUTLET SOCKET > REMOVAL

for Preparation Click here



1. REMOVE REAR DOOR SCUFF PLATE RH

HINT:
Use the same procedure described for the LH side.



2. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH


3. REMOVE BACK DOOR WEATHERSTRIP


4. REMOVE REAR FLOOR MAT SUPPORT PLATE REAR


    B063594
  1. Remove the 5 bolts and mat support plate.



5. REMOVE DECK BOARD SUB-ASSEMBLY
  1. Remove the 2 bolts and the deck board sub-assembly.



6. REMOVE DECK BOARD ASSEMBLY


    B063596
  1. Remove the 2 bolts and the deck board assembly.



7. REMOVE DECK FLOOR BOX RH

HINT:
Use the same procedures described for the LH side.



8. REMOVE REAR DECK TRIM COVER
  1. Using a screwdriver, pry out the trim cover.

    HINT:
    Tape the screwdriver tip before use.



9. REMOVE TONNEAU COVER HOOK A


10. REMOVE REAR DECK TRIM COVER


11. REMOVE RR POWER POINT SOCKET ASSEMBLY


    E003722
  1. Turn the socket in the circumference direction as shown in the illustration, disengage the claw between the socket and the RR power point socket cover, and push out the socket to the room side.



    I033305E01
  1. Align the socket with the notch on the RR power point socket cover, remove the RR power point socket assembly to the room side.