Home › BODY ELECTRICAL › OTHER SYSTEM › POWER OUTLET SOCKET

POWER OUTLET SOCKET > REMOVAL

for Preparation Click here



1. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY


    B062740E01
  1. Disengage the 5 clips and 2 claws, and remove the console upper rear panel, and then disconnect the connectors.



2. REMOVE POWER POINT SOCKET ASSEMBLY


    I030881
  1. Pressing the claw of the power point socket assembly in the direction of the arrow, push the power point socket assembly toward the inside of the chamber and remove it.