ROOF HEADLINING > INSTALLATION |
| 1. INSTALL ROOF HEADLINING ASSEMBLY |
![]() |
Align the marking, and then install the wire harness with tape.
Attach the roof wire harness along the adhered part.
Install the roof headlining with the 4 clips.
| 2. INSTALL VISOR HOLDER |
Install the screw and visor holder.
| 3. INSTALL VISOR ASSEMBLY LH |
![]() |
Install the 2 screws and visor sub-assembly.
Install the 2 screws and visor assembly.
| 4. INSTALL VISOR ASSEMBLY RH |
| 5. INSTALL INTERIOR LIGHT ASSEMBLY NO. 1 |
Install interior light switch base and the interior light, and engage the 4 claws.
Install the No. 1 roof wire to the claw of the interior light.
Engage the 4 claws.
Install the 2 covers and engage the 4 claws.
Install the interior light lens and engage the 4 claws.
| 6. INSTALL DOME LIGHT ASSEMBLY (w/ RSE) |
| 7. INSTALL TELEVISION DISPLAY ASSEMBLY (w/ RSE) |
| 8. INSTALL ROOF CONSOLE BOX ASSEMBLY |
![]() |
Install the console box and reconnect the map light switch connector and sliding roof switch connector.
Engage the 3 claws and 2 clips.
| 9. INSTALL INNER REAR VIEW MIRROR ASSEMBLY |
| 10. INSTALL FRONT PILLAR GARNISH LH |
![]() |
Install the clip labeled A, clip labeled B and pillar garnish, and engage the claw.
Install 2 bolts.
Install the 2 assist grip plugs.
| 11. INSTALL FRONT PILLAR GARNISH RH |
| 12. INSTALL CENTER PILLAR GARNISH UPPER LH |
Install the pillar garnish and engage the 6 claws.
Install the 2 bolts.
![]() |
Install the front seat outer belt (floor anchor side) and install the bolt.
| 13. INSTALL CENTER PILLAR GARNISH UPPER RH |
| 14. INSTALL CENTER PILLAR GARNISH LOWER LH |
![]() |
Install the 2 clips and pillar garnish. And engage the 6 claws labeled A and 2 claws labeled B.
| 15. INSTALL CENTER PILLAR GARNISH LOWER RH |
| 16. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER LH |
Install the side garnish and engage the 9 clips.
Install the 3 bolts and clip.
Install the tonneau cover hook and the screw.
| 17. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER RH |
| 18. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER LH (for 50/50 Split Seat Type) |
Install the side garnish and engage the 4 screws.
![]() |
Engage the 4 clips labeled A and 5 clips labeled B, and install the 3 screws.
Install the rear No. 2 shoulder anchor bolt.
| 19. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER RH (for 50/50 Split Seat Type) |
| 20. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH |
Install the side panel and engage the 6 clips.
![]() |
Install the 3 screws and clips.
Install the screw and deck trim cover.
| 21. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH |
| 22. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (for 50/50 Split Seat Type) |
Install the side panel and the 5 clips.
![]() |
Install the 3 screws and the bolt.
| 23. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (for 50/50 Split Seat Type) |
| 24. INSTALL REAR FLOOR CARPET ASSEMBLY |
| 25. INSTALL DECK TRIM COVER REAR |
| 26. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH |
| 27. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH |
| 28. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH |
| 29. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH |
| 30. INSTALL COWL SIDE TRIM BOARD LH |
![]() |
Install the trim board and engage the 2 claws.
Install the cap nut.
| 31. INSTALL COWL SIDE TRIM BOARD RH |
| 32. INSTALL FRONT DOOR SCUFF PLATE LH |
![]() |
Install the scuff plate. Engage the claw labeled A, claw labeled B, 4 claws labeled C, claw labeled D and claw labeled E.
| 33. INSTALL FRONT DOOR SCUFF PLATE RH |
| 34. INSTALL REAR DOOR SCUFF PLATE LH |
![]() |
Install the scuff plate. Engage the claw labeled A, claw labeled B, 2 claws labeled C and claw labeled D.
| 35. INSTALL REAR DOOR SCUFF PLATE RH |
| 36. INSTALL QUARTER SCUFF PLATE INSIDE LH (for 50/50 Split Seat Type) |
![]() |
Install the scuff plate and the 2 bolts.
Engage the 4 claws and covers.
| 37. INSTALL QUARTER SCUFF PLATE INSIDE RH (for 50/50 Split Seat Type) |
| 38. INSTALL SIDE TRIM BOX ASSEMBLY LH |
Install the side trim box and the screws.
| 39. INSTALL SIDE TRIM BOX ASSEMBLY RH |
Install the side trim box and the screws.
| 40. INSTALL DECK TRIM SIDE BOARD UPR LH |
Install the side board and the screw.
| 41. INSTALL DECK TRIM SIDE BOARD UPR RH |
Install the side board and the screw.
| 42. INSTALL DECK TRIM COVER REAR |
Install the trim cover.
| 43. INSTALL DECK FLOOR BOX LH |
![]() |
Install the deck floor box, luggage hold belt and bolt.
Install the cover and the claws.
| 44. INSTALL DECK FLOOR BOX RH |
| 45. INSTALL REAR FLOOR MAT SUPPORT PLATE REAR |
![]() |
Install the mat support plate and 5 bolts.
| 46. INSTALL DECK BOARD ASSEMBLY |
![]() |
Install the deck board assembly and the 2 bolts.
| 47. INSTALL DECK BOARD SUB-ASSEMBLY |
Install the deck board sub-assembly and the 2 bolts.
| 48. INSTALL BACK DOOR WEATHERSTRIP |
| 49. INSTALL SEAT ANCHOR RAIL NO. 4 (for 50/50 Split Seat Type) |
Install the 2 covers, 2 bolts and anchor rail.
| 50. INSTALL REAR NO. 2 SEAT LOCK ASSEMBLY LH |
Install the seat lock and 2 bolts.
| 51. INSTALL REAR NO. 2 SEAT LOCK ASSEMBLY RH |
![]() |
Install the seat lock and 2 bolts.
| 52. INSTALL NO. 3 SEAT LEG COVER NO. 2 (for 50/50 Split Seat Type) |
| 53. INSTALL REAR NO. 2 SEAT ASSEMBLY (for 50/50 Split Seat Type) |
| 54. INSTALL TONNEAU COVER RETRACTOR SUB-ASSEMBLY |