OIL PUMP > INSPECTION |
| 1. INSPECT OIL PUMP RELIEF VALVE |
![]() |
Coat the valve with engine oil and check that it falls smoothly into the valve hole under its own weight.
If it dose not, replace the relief valve. If necessary, replace the oil pump assembly.
| 2. INSPECT OIL PUMP ROTOR SET |
![]() |
Place the drive and driven rotors into the pump body with the marks facing the pump body cover side.
![]() |
Inspect the rotors for tip clearance.
Using a feeler gauge, measure the clearance between the drive and driven rotor tips.
![]() |
Inspect the rotors for side clearance.
Using a feeler gauge and precision straight edge, measure the clearance between the rotors and precision straight edge.
![]() |
Inspect the rotor for body clearance.
Using a feeler gauge, measure the clearance between the driven rotor and body.