Home › ENGINE ยท 1GR-FE › COOLING › RADIATOR

RADIATOR > REMOVAL

for Preparation Click here



1. DRAIN ENGINE COOLANT


2. REMOVE RADIATOR SUPPORT SEAL UPPER
  1. Remove the 11 clips and radiator support upper.



3. SEPARATE FAN SHROUD


    A072536
  1. Disconnect the reserve tank hose from the radiator.

  1. Disconnect the radiator hose No. 1 from the radiator.

  1. Disconnect the oil cooler inlet hose from the radiator.

  1. Disconnect the oil cooler outlet hose from the radiator.

  1. Disconnect the radiator hose No. 2 from the radiator.



    A072539
  1. Remove the 3 bolts, and separate the fan shroud.

    HINT:
    Temporarily put the separated fan shroud at an appropriate location in the engine room.



4. REMOVE RADIATOR ASSEMBLY


    A067113
  1. Remove the 4 bolts and radiator.



5. REMOVE RADIATOR SUPPORT NO.1
  1. Remove the 1 radiator support No. 1.



6. REMOVE RADIATOR SUPPORT NO.2
  1. Remove the 3 radiator support No. 2.



7. REMOVE RADIATOR SUPPORT NO.1 BUSH
  1. Remove the 4 radiator support No. 1 bush.