Home › TRANSMISSION ยท A750E AUTOMATIC TRANSMISSION › SHIFT LEVER ASSEMBLY

SHIFT LEVER ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY


    B062740E01
  1. Disengage the 5 clips and 2 claws, and remove the console upper rear panel, and then disconnect the connectors.



2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    B062741E01
  1. Disengage the 6 clips and 2 claws, and then remove the upper console panel sub-assembly.

    NOTICE:
    Be careful not to snap the claws during the operation.



3. REMOVE NO.1 CONSOLE UPPER PANEL GARNISH


    B062742E01
  1. Disengage the clip.

  1. Pull the No. 1 console upper panel garnish rearward to be removed.



4. REMOVE NO.2 CONSOLE UPPER PANEL GARNISH


5. REMOVE REAR CONSOLE BOX ASSEMBLY


    B078371E01
  1. Disconnect the connectors.

  1. Remove the 6 bolts <B> and rear console box assembly.



6. REMOVE FLOOR SHIFT ASSEMBLY


    D028699
  1. Disconnect the 2 connectors and 2 clamps.

  1. Remove the lock plate and disconnect the transmission control cable.

  1. Remove the 4 bolts and floor shift assembly.