Home › BODY › EXTERIOR › ROOF RACK

ROOF RACK > REMOVAL

for Preparation Click here


HINT:
A bolt without torque specification is a standard bolt (Click here).



1. REMOVE ROOF RACK LEG COVER FRONT LH


    B063611
  1. Using a screwdriver, disengage the 4 claws and clip, and remove the leg cover.

    HINT:
    Tape the screwdriver tip before use.



2. REMOVE ROOF RACK LEG COVER FRONT RH
  1. Using a screwdriver, disengage the 4 claws and clip, and remove the leg cover.

    HINT:
    Tape the screwdriver tip before use.



3. REMOVE ROOF RACK LEG COVER REAR LH


    B063612
  1. Using a screwdriver, disengage the 4 claws and clip, and remove the leg cover.

    HINT:
    Tape the screwdriver tip before use.



4. REMOVE ROOF RACK LEG COVER REAR RH
  1. Using a screwdriver, disengage the 4 claws and clip, and remove the leg cover.

    HINT:
    Tape the screwdriver tip before use.



5. REMOVE ROOF RACK ASSEMBLY


    B063613
  1. Remove the 4 bolts and the roof rack assembly.



6. REMOVE ROOF RACK LEG COVER FRONT LH
  1. Remove the 2 screws and rack leg.



7. REMOVE ROOF RACK LEG COVER FRONT RH
  1. Remove the 2 screws and rack leg.



8. REMOVE ROOF RACK BAR JOINT NO. 2
  1. Using a torx wrench (T25), remove the 8 screws the roof rack bar joint.