FRONT DOOR WINDOW FRAME MOULDING > INSTALLATION |
| 1. INSTALL FRONT DOOR WINDOW FRAME MOULDING REAR LH |
![]() |
Using a shop rag, remove the adhesive tape from the moulding.
Clean the contact surface of the body with shop rag saturated with white gasoline.
Clean the outer circumference of the moulding with white gasoline.
Apply new adhesive tape to the moulding, as shown in the illustration.
| A | (1) 330 mm (12.992 in.), (2) 265.0 mm (10.433 in.) |
| B | 5.0 mm (0.197 in.) |
| C | (1) 0.8 mm (0.031 in.), (2) 1.2 mm (0.197 in.) |
Using a heat light, heat the body and moulding.
| Body | 40 to 60°C (104 to 140°F) |
| Moulding | 20 to 30°C (68 to 86°F) |
Remove the moulding release sheet from the moulding face.
Engage the 2 claws and install the moulding.