Home › BODY › EXTERIOR › REAR DOOR WINDOW FRAME MOULDING

REAR DOOR WINDOW FRAME MOULDING > INSTALLATION

for Preparation Click here



1. INSTALL REAR DOOR WINDOW FRAME MOULDING FRONT LH


    B062961E01
  1. Using a shop rag, remove the adhesive tape from the moulding.

    1. Clean the contact surface of the body with a of shop rag saturated with white gasoline.

  1. Clean the outer circumference of the moulding with white gasoline.

  1. Apply new adhesive tape to the moulding, as shown in the illustration.
    Dimension: 
    A
    (1) 50.0 mm (1.969 in.), (2) 330 mm (12.992 in.)
    B
    5.0 mm (0.197 in.)
    C
    (1) 1.2 mm (0.047 in.), (2) 0.8 mm (0.031 in.)

  1. Using a heat light, heat the body and moulding.
    Heating temperature: 
    Body
    40 to 60°C (104 to 140°F)
    Moulding
    20 to 30°C (68 to 86°F)

    NOTICE:
    Do not heat the body and moulding excessively.

  1. Remove the moulding release sheet from the moulding face.

    HINT:
    Be careful for dirt or foreign objects not to stick to the adhered part when peeling off the moulding release sheet.

  1. Engage the 2 claws and install the moulding.

    NOTICE:
    Do not apply excessive force onto the moulding, but steady pressure with your thumbs.