Home › BODY › EXTERIOR › REAR DOOR WINDOW FRAME MOULDING

REAR DOOR WINDOW FRAME MOULDING > REMOVAL

for Preparation Click here


HINT:
On the RH side, use the same procedures as on the LH side.



1. REMOVE REAR DOOR WINDOW FRAME MOULDING FRONT LH


    B065260E01
  1. Remove the screw.

  1. Using a heat light, heat the moulding to 40 to 60°C (104 to 140°F).

    NOTICE:
    Do not heat the moulding excessively.

  1. Disengage the 2 claws by pushing the moulding and remove the moulding.

    NOTICE:
    If reusing the moulding, take cake not to damage the moulding.