Home › TRANSMISSION · A750F AUTOMATIC TRANSMISSION › PARK / NEUTRAL POSITION SWITCH

PARK / NEUTRAL POSITION SWITCH > INSPECTION

for Preparation Click here



1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    C110340E39
  1. Jack up the vehicle.

  1. Disconnect the park/neutral position switch connector.

  1. Measure resistance according to the value(s) in the table below when the shift lever is moved to each position.

    Standard resistance:
    Shift Position
    Tester Connection
    Specified Condition
    P
    2 - 6 and 4 - 5
    Below 1 Ω
    Except P
    ↑
    10 kΩ or higher
    R
    1 - 2
    Below 1 Ω
    Except R
    ↑
    10 kΩ or higher
    N
    2 - 9 and 4 - 5
    Below 1 Ω
    Except N
    ↑
    10 kΩ or higher
    D and 4
    2 - 7
    Below 1 Ω
    Except D and 4
    ↑
    10 kΩ or higher
    3
    2 - 3
    Below 1 Ω
    Except 3
    ↑
    10 kΩ or higher
    2 and L
    2 - 8
    Below 1 Ω
    Except 2 and L
    ↑
    10 kΩ or higher