Home › TRANSMISSION · A750E AUTOMATIC TRANSMISSION › SPEED SENSOR

SPEED SENSOR > INSPECTION

for Preparation Click here



1. INSPECT SPEED SENSOR (NT SENSOR)


    C110343E10
  1. Disconnect the speed sensor connector from the transaxle.

  1. Measure the resistance according to the value(s) in the table below.

    Resistance:
    Tester Connection
    Specified Condition
    20°C (68°F)
    1 - 2
    560 to 680 Ω



2. INSPECT SPEED SENSOR (SP2 SENSOR)


    C110343E10
  1. Disconnect the speed sensor connector from the transaxle.

  1. Measure the resistance according to the value(s) in the table below.

    Resistance:
    Tester Connection
    Specified Condition
    20°C (68°F)
    1 - 2
    560 to 680 Ω