Home › TRANSMISSION ยท A750E AUTOMATIC TRANSMISSION › TRANSMISSION CONTROL CABLE

TRANSMISSION CONTROL CABLE > REMOVAL

for Preparation Click here



1. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY


    B062740E01
  1. Disengage the 5 clips and 2 claws, and remove the console upper rear panel, and then disconnect the connectors.



2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    B062741E01
  1. Disengage the 6 clips and 2 claws, and then remove the upper console panel sub-assembly.

    NOTICE:
    Be careful not to snap the claws during the operation.



3. REMOVE NO.1 CONSOLE UPPER PANEL GARNISH


    B062742E01
  1. Disengage the clip.

  1. Pull the No. 1 console upper panel garnish rearward to be removed.



4. REMOVE NO.2 CONSOLE UPPER PANEL GARNISH


5. REMOVE REAR CONSOLE BOX ASSEMBLY


    B078371E01
  1. Disconnect the connectors.

  1. Remove the 6 bolts <B> and rear console box assembly.



6. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY
  1. Disconnect the transmission control cable assembly from shift lever assembly.



    D028683
  1. Remove the lock plate and disconnect the transmission control cable.



    D028684
  1. Remove the 2 bolts and disconnect the transmission control cable assembly from body.



    D028685
  1. Remove the 2 nuts and disconnect the transmission control cable assembly from body.



    D028686
  1. Remove the lock plate and transmission control cable bracket.

  1. Remove the nut and transmission control cable assembly.



7. INSPECT SHIFT LEVER POSITION

HINT:
(Click here)



8. ADJUST SHIFT LEVER POSITION

HINT:
(Click here)