Home › ENGINE ยท 2UZ-FE › ENGINE MECHANICAL › DRIVE BELT

DRIVE BELT > INSTALLATION

for Preparation Click here



1. INSTALL FAN AND GENERATOR V BELT


    A053117E01
  1. Set the V belt onto every parts except the No. 2 idler pulley, as shown in the illustration.

  1. Loosen the V belt by turning the belt tensioner counterclockwise.

  1. Set the V belt to the No. 2 idler pulley.



    A052038E01
  1. After installing a new belt, check that the mark is within the B range as shown in the illustration.